Factory Outlet Hdpe Pipe Manufacturer For Water Supply For Sale

Home > Products > HDPE PIPE AND FITTINGS > HDPE PIPE > Factory Outlet HDPE Pipe Manufacturer for Water Supply

Factory Outlet HDPE Pipe Manufacturer for Water Supply

HDPE pipe is a perfect solution for municipal engineering system and urban water supply and drainage system. HDPE pipe adopts high-quality original PE80 or PE100 raw material, with the size range of DN 20-1200mm, and the performance conforms to ISO4427 standard and other national certification standards. HDPE pipes for water supply can be manufactured with different rated pressures, mainly: SDR11-pn16 Bar, SDR13.6-pn12.5 Bar,SDR17-pn10 Bar, SDR21-pn6 Bar, SDR26-pn6 Bar, etc.

Inquiry

Detail

Product Features

Our HDPE pipe for water and sewer is manufactured for excellent performance and a long life expectancy.
1. Its butt-fused joints eliminate potential leak points, common at 10 to 20 feet with ductile iron pipe, for a zero leak rate.
2. Highly resistant to corrosion and weather, recent studies conclude it will last at least 50 years.
3. Its light weight and flexibility make it easy to install, eliminate the need for fittings required with directional changes, and make it highly suitable for use in earthquake prone areas.
4. Its high-strength walls give it the highest PE pressure rating, outstanding resistance to SCG and increased resistance to rapid crack propagation.
5. The increased working stress rating of high-performance PE resin material makes it a superior choice over steel or ductile iron pipe, especially for the large diameter pipe sizes.

factory outlet hdpe pipe manufacturer for water supply 5

factory outlet hdpe pipe manufacturer for water supply 6

Product Parameters

Specification: OD16mm-OD2000mm
Pressure: 0.32Mpa-1.6Mpa
Length: 5.8m/11.9m or as required
Standard: GB/T13663-2000, ISO4427-1:2007
Material: PE, Polyethylene
Color: Black or as required

Pressure	PN0.32MPa	PN0.4MPa	PN0.6MPa	PN0.8MPa	PN1.0MPa	PN1.25MPa	PN1.6MPa	PN2.0MPa
Pressure	SDR 41	SDR 33	SDR 26	SDR 21	SDR 17	SDR 13.6	SDR 11	SDR 9
OD（mm）	Thickness	Thickness	Thickness	Thickness	Thickness	Thickness	Thickness	Thickness
OD（mm）	（mm）	（mm）	（mm）	（mm）	（mm）	（mm）	（mm）	（mm）
16								2.3
20						2	2.3	2.3
25						2.1	2.3	3
32						2.3	3	3.6
40					2.3	2.9	3.7	4.5
50					2.9	3.7	4.6	5.6
63					3.7	4.7	5.8	7.1
75					4.5	5.6	6.8	8.4
90				4.3	5.4	6.7	8.2	10.1
110			4.2	5.3	6.6	8.1	10	12.3
125			4.8	6	7.4	9.2	11.4	14
140			5.4	6.7	8.3	10.3	12.7	15.7
160			6.2	7.7	9.5	11.8	14.6	17.9
180			6.9	8.6	10.7	13.3	16.4	20.1
200			7.7	9.6	11.9	14.7	18.2	22.4
225			8.6	10.8	13.4	16.6	20.5	25.2
250			9.6	11.9	14.8	18.4	22.7	27.9
280			10.7	13.4	16.6	20.6	25.4	31.3
315	7.7	9.7	12.1	15	18.7	23.2	28.6	35.2
355	8.7	10.9	13.6	16.9	21.1	26.1	32.2	39.7
400	9.8	12.3	15.3	19.1	23.7	29.4	36.3	44.7
450	11	13.8	17.2	21.5	26.7	33.1	40.9	50.3
500	12.3	15.3	19.1	23.9	29.7	36.8	45.4	55.8
560	13.7	17.2	21.4	26.7	33.2	41.2	50.8	62.5
630	15.4	19.3	24.1	30	37.4	46.3	57.2	70.3
710	17.4	21.8	27.2	33.9	42.1	52.2	64.5	79.3
800	19.6	24.5	30.6	38.1	47.4	58.8	72.6	89.3
900	22	26.7	34.4	42.9	53.3	66.2	81.7
1000	24.5	30.6	38.2	47.7	59.3	72.5	90.2
1200	29.4	36.7	45.9	57.2	67.9	88.2
1400	34.3	42.9	53.5	66.7	82.4	102.9
1600	39.2	49	61.2	76.2	94.1	117.6
1800	43.8	54.5	69.1	85.7	105.9
2000	48.8	60.6	76.9	95.2	117.6

factory outlet hdpe pipe manufacturer for water supply 7

Application

Meets GB/T13663-2000, ASTM D2239, ASTM D2737, ASTM D3035, ASTM F714.
Our high-density polyethylene water and sewer pipe is available in 1/2-inch to 48-inch diameters. The product’s physical properties make it applicable to open-trench, horizontal directional drilling, pipe-bursting and slip-lining installations. It can be manufactured with the color striping to identify application, such as a blue stripe for potable water, a yellow stripe for gas applications and a red stripe for mining applications.